Skip to content
Irrigation Professional? Sign up for your Wholesale Discounts!
Irrigation Professional? Sign up for your Wholesale Discounts!
SKU 164.1580911

RAIN RN155 PLUS Solenoid Valve

Original price WAS $0
Original price WAS $0.00 - Original price $0.00
Original price WAS
Current price $72.92
$48.54 - $72.92
Current price $72.92
Excl. GST
Flow Rate
30 - 150 L/m
The flow rate of water from the fixture.
30 - 150 L/m (Litres per Minute)
1800 - 9000L/h (Litres per Hour)

7.93 - 39.63 GPM (Gallons per Minute)
475.51 - 2377.55 GPH (Gallons per Hour)
At 100 - 1200 KPa
Minimum: 100 KPa
Maximum: 1200 KPa

Pickup available at Parkland Products Auckland

Usually ready in 24 hours

We accept all major credit cards.

  • Mastercard
  • Shop Pay
  • Union Pay
  • Visa
  • Bank Transfer
The RN 155 solenoid valve is the ideal solution for residential and commercial irrigation with flow rates from 30 l/min to 90 l/min. Available in different configurations of diameters (¾" to 1") and voltage (24 Vac and 9 Vdc). The presence of the ferrule of the patented Manifold system allows significant time savings during installation, but more importantly it allows the solenoid valve to be replaced in a matter of seconds, directly from inside the valve box and without the use of tools.
9 Vdc Solenoid

9 Vdc Solenoid

Battery-operated controllers control 9Vdc latching solenoids. The control unit will send an electrical signal at the start of irrigation to open the solenoid valve and a signal at the end of irrigation to close the solenoid valve.

24 Vac Solenoid

24 Vac Solenoid

The controllers control 24 Vac normally closed solenoids. The control unit will supply the solenoid with a 24 Vac electrical signal for the entire irrigation time to open the electrovalve.

Manifold system

Manifold system

The patented Rain Manifold System allows easy installation of solenoid valves and during valve box maintenance allows quick removal of the solenoid valve.

    RN 155 PLUS
    Threads available: 3/4" M, 1" F, 1" M, 1" MxU
    Solenoid type: 24 Vac - normally closed, 9 Vdc - latching
    Manufacturing material: Glass fiber PA 6 30%
    Solenoid inrush absorption 24 Vac: 0.43 A
    Absorption at solenoid maintenance 24 Vac: 0.21 A
    Operating flow rate: 30 - 150
    Minimum pressure: 1 bar
    Maximum pressure: 12 bar
    Minimum operating flow rate: 30 l/min
    Maximum operating flow rate: 150 l/min
    Minimum operating temperature: 4°C
    Maximum operating temperature: 70°C
    Diaphragm type: In co-molded parts
    Manual opening:

Disclaimer: Due to continued product development. Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only. Actual products offered for sale may vary in use, design, required attachments and safety features.

FAQ's

What is the knob in the middle of the solenoid valve for?

The central knob is the partializer and is used to adjust the water flow inside the solenoid valve. It is normally supplied fully open. It is often necessary to adjust the flow on sectors with dripline or microirrigation.

Free Shipping

When you spend $250+*

Give Us A Call

09 415 0300

35 YEARS

NZ Owned & Operated

NATIONWIDE SERVICING

Experienced Irrigation Technicians

We’re looking for stars!
Let us know what you think