Toro Infinity Series INF55 Conversion Assembly Nozzles 40mm (1 1/2") Dual Trajectory Full Circle & Part Circle In One

• TORO INFINITY® SERIES GOLF ROTORS INF35/INF55 SPRINKLERS - Spec Sheet Download View File
• Toro Infinity Series Golf Rotors - Brochure Download View File
• Toro Infinity Stealth Kits - Spec Sheet Download View File
• Toro Infinity Series Performance Nozzles - Brochure Download View File

Toro Infinity Series NOZZLE SELECTION- INF35

• INF35 has eight nozzle variations (30, 31, 32, 33, 34, 35, 36 & 37)
• Three in-line nozzles, rotating stream pattern
• Two back nozzle positions
• Stator variations: 3
• Radius reduction screw 363-4839 for fine tuning

Toro Infinity Series - INF55
Radius:	16.7 – 28.0m (55’ – 92’)
Flow Rate:	53.0 – 232.0 LPM (14.1 – 61.3 gpm)
Precipitation Rates:	Minimum - 11.4 mm/hr (0.45”/hr); Maximum - 20.5 mm/hr (0.81”/hr)
Pilot Valve:	Selectable at 3.4; 4.5; 5,5; and 6.9 bar (50, 65, 80 and 100 psi)
Recommended Operating Pressure Range:	4.5-6.9 bar (65-100 psi); Maximum = 10,3 bar (150 psi); Minimum = 2,8 bar (40 psi)
SMART ACCESS™ Cover and Compartment Diameter:	19.3cm (7.6”)
Body height:	29cm (113/8”)
Body weight:	2.30kg (5.08 lb)
WARRANTY:	Two years; Five years when installed with Toro® Swing Joints

Toro Infinity Series BODY - Power Options
Standard Solenoid:	24 VAC, 50/60 Hz, Inrush; 0.30A, Holding; 0.20A
Spike Guard Solenoid:	24 VAC, 50/60 Hz, Inrush; 0.12A, Holding; 0.10A
Nickel-Plated Spike Guard Solenoid:	24 VAC, 50/60 Hz, Inrush; 0.12A, Holding; 0.10A
DC Latching Solenoid (DCLS):	Momentary low voltage pulse
LYNX Smart Module with DCLS:	Momentary low voltage pulse

Disclaimer: Due to continued product development. Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only. Actual products offered for sale may vary in use, design, required attachments and safety features.

• Toro Infinity Stealth Kit | for Dual Trajectory Models
• Toro Infinity Series INF50 Body | 40mm (1 1/2")