Skip to content
Free shipping on your first order* Apply Discount
Free shipping on your first order* Apply Discount
Toro Infinity Series INF35 Conversion Assembly Nozzles | 25mm (1") | Dual Trajectory | Full Circle & Part Circle In One

Toro Infinity Series INF35 Conversion Assembly Nozzles 25mm (1") Dual Trajectory Full Circle & Part Circle In One

SKU INF35-3134
$0.00 - $0.00
$399.28
$399.28 - $399.28
$399.28
Excl. GST
  • Mastercard
  • Shop Pay
  • Union Pay
  • Visa

Conversion assemblies are designed to give you multiple nozzles options for your desired set-up. Body Required.

Ratcheting Riser
Align part circle quickly and easily or adjust watering locations to suit seasonal needs.

Hot Spot Watering
Nozzle base can be turned in either direction and held to put down as much water as needed, precisely where you want it. Standard on all Toro Part circle Golf rotors!

True Part and Full-Circle in One – 40° - 330° Part Circle and 360º Full Circle
These sprinklers can be 360º full circle today and part circle tomorrow allowing you to simply and economically adjust the area of coverage to match your seasonal needs or meet water rationing mandates.

Dual Trajectory – 2 positions – 15°or 25°
The 25° setting provides maximum distance of throw and the 15° setting provides improved wind performance, radius reduction and obstacle avoidance.

Toro® INFINITY® Golf Sprinklers

Performance Series Nozzles for Toro® Infinity® & Flex800™ Sprinklers Golf

Toro 2-Wire Irrigation System with Lynx

Toro Sprinklers Ultimate - Infinity
    Toro Infinity Series NOZZLE SELECTION- INF35

    • INF35 has eight nozzle variations (30, 31, 32, 33, 34, 35, 36 & 37)
    • Three in-line nozzles, rotating stream pattern
    • Two back nozzle positions
    • Stator variations: 3
    • Radius reduction screw 363-4839 for fine tuning

    Toro Infinity Series - INF35
    Radius: 12.8 – 25.3m (43’ – 83’)
    Flow Rate: 31.0 – 177.9 LPM (8.2 – 47 gpm)
    Precipitation Rates: Minimum = 10.8 mm/hr (0.43”/hr); Maximum = 19.4 mm/hr (0.76”/hr)
    Pilot Valve: Selectable at 3.4; 4.5; 5.5; and 6.9 bar (50, 65, 80 and 100 psi)
    Recommended Operating Pressure Range: 4.5-6.9 bar (65-100 psi); Maximum = 10,3 bar (150 psi); Minimum = 2,8 bar (40 psi)
    SMART ACCESS™ Cover and Compartment Diameter: 19,3cm (7.6”)
    Body height: 25cm (10”)
    Body weight: 1.35kg (2.98 lb)
    WARRANTY: Two years; Five years when installed with Toro® Swing Joints

    Toro Infinity Series BODY - Power Options
    Standard Solenoid: 24 VAC, 50/60 Hz, Inrush; 0.30A, Holding; 0.20A
    Spike Guard Solenoid: 24 VAC, 50/60 Hz, Inrush; 0.12A, Holding; 0.10A
    Nickel-Plated Spike Guard Solenoid: 24 VAC, 50/60 Hz, Inrush; 0.12A, Holding; 0.10A
    DC Latching Solenoid (DCLS): Momentary low voltage pulse
    LYNX Smart Module with DCLS: Momentary low voltage pulse

Disclaimer: Due to continued product development. Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only. Actual products offered for sale may vary in use, design, required attachments and safety features.

Rotor Sprinklers
SMART ACCESS™

SMART ACCESS™

Provides top accessibility to all critical components

  • No digging or unsightly turf repair scars
  • Customizable markerNo buried wire splices or ground faults
  • Replaceable cover if damaged
  • Pilot valve removable with water “ON”Increased labor efficiency
  • Lower long term cost of ownershi
Built for flexible expansion

Built for flexible expansion

SMART ACCESS™ design enables you to add new technology for decades to come.

  • LSM 2-wire module accessible from the top
  • Wire splices protected and accessible from the top
  • Pilot valve accessible from the top
  • Replaceable cover if damaged
  • Pilot valve removable with water “ON”Room to Grow
  • Future-proof your investment

INF35/FLX35 Performance Data—25° & 15° – (Metric)

Infinity Overview

Free Shipping

When you spend $250+*

Give Us A Call

09 415 0300

35 YEARS

NZ Owned & Operated

NATIONWIDE SERVICING

Experienced Irrigation Technicians