Rain Amico R Rechargeable Tap Timer Controller
Rain Amico R Rechargeable Tap Timer Controller
Rain Amico R Rechargeable Tap Timer Controller
Rain Amico R Rechargeable Tap Timer Controller
Parkland Products - Auckland

Available for pickup

Usually ready in 24 hours

SKU: 200.4043502

Rain Amico R Rechargeable Tap Timer Controller

Save 20%
$163.06 excl. GST $203.83 – $230.41 $163.06 – $184.32 excl. GST /

Select an option to add this to your cart.

The Amico R tap controller is the first irrigation controller with a rechargeable lithium battery. It can be recharged using the included USB cable, thus lowering the consumption of environmentally harmful used batteries. The Amico R controller is recommended for applications such as balconies and small vegetable gardens.

Rain Amico R Rechargeable Tap Timer Controller

Available for pickup

Usually ready in 24 hours

Parkland Products - Auckland

Available for pickup

Usually ready in 24 hours

322 Rosedale Road
Albany
AUK
Auckland 0632
New Zealand

094150300

Lithium battery

Lithium battery

The controllers are supplied with a rechargeable lithium battery. It is no longer necessary to replace the batteries in the control unit at the beginning of the irrigation season, as you can simply recharge the battery by connecting it to a normal smartphone recharger.
3 Easy Steps

3 Easy Steps

The special three-step programming feature allows for easy and intuitive programming in less than 60 seconds. The programming logic is based on answering three simple questions: what time of day to water, for how long, and how often.
One Look Display

One Look Display

The 3" backlit display shows you the full irrigation schedule at a glance. It is no longer necessary to navigate through various programming menus to see the irrigation schedule.
Detachable

Detachable

The removable electronic unit allows for easy programming, battery replacement, and quick solenoid valve maintenance.
Metal inlet

Metal inlet

The metal inlet provides a more reliable and stronger seal and connection.

Rain AMICO R2 Tap Timer Controller

Controller type: Tap timer
Power supply: 18650 rechargeable lithium battery - 2,000 mAh 3.7V
Recharging mode: Via USB cable
CU: Removable control unit
Screen: Backlit screen
Lid: Closing lid
Battery: Low battery signal
Threaded inlet: 3/4 ABS - 1 F metal
Threaded outlet: 3/4 M in ABS
Maximum number of zones: 2
Minimum flow rate: 5 l/min
Maximum flow rate: 40 l/min
Minimum pressure: 1 bar
Maximum pressure: 6 bar
Programming mode: Traditional
Number of programs: 1
Start times per program: 1
Maximum number of starts per day: 4
Minimum irrigation time per zone: 1 min
Maximum irrigation time per zone: 240 min
Irrigation frequency: from every 6 hours to every 15 days
Manual start: By zone

Disclaimer: Due to continued product development. Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only. Actual products offered for sale may vary in use, design, required attachments and safety features.

TAP TIMER How often should the battery be replaced

We recommend replacing the batteries at the beginning of each irrigation season.

TAP TIMERS A flashing battery icon appears on the display. What does it mean?

The flashing battery icon means the battery is low and should be replaced.

TAP TIMERS I programmed my tap timer but the date Feb/23 appears on the display. What does it mean? Will the irrigation start on the 23rd of February?

Feb/23 is a static screen icon and does not affect the programming.

TAP TIMERS Is it possible to connect a rain sensor to tap controllers?

Not all controllers are compatible with the rain sensor. Compatible models are: AMICO D AMICO VISION and it is possible to connect the Acqua Vision rain sensor

I programmed my tap timer but the date Feb/23 appears on the display. What does it mean? Will the irrigation start on the 23rd of February?

Feb/23 is a static screen icon and does not affect the programming.

Tap Timers How can I turn one zone OFF?

Press the AUTO/OFF button for 3" and using the '+' button select OFF

TAP TIMERS What does the last data item on the screen mean and why can't I change it?

The last figure on the screen indicates the time left before the following irrigation. It can't be changed because it is calculated by the controller.

TAP TIMERS I installed the control unit to the tap but water keeps coming out.

Close the water tap and perform a manual start of one minute per zone. At the end of the manual cycle, open the tap again.

Related Products